PDR-654/PDR-654T 6.5” Monitor MP3/MP4 Player AM/FM Radio Built-in TV tuner (only for PDR-654T model) Owner’s Manual Take the time to read
10 Main Menu The best way to discover the program is to explore each screen in detail, and to find out how to move from one to another. Read this cha
11 ◆USB/SD/MMC Interface / To start USB /SD /MMC, tap the corresponding icon on main menu screen, or press the MODE button on the front panel or RC
12 ◆TV Model (only for PDR-654T) To start TV mode, tap on TV button from main menu screen. Connect a TV antenna to the TV antenna jack of the unit. S
13 z System Select this menu item is to set TV system: SECAM => NTSC =>PAL, press NTER button on the remote or tap the screen to select. z Au
14 LONDNESS: Selecting loudness ON will emphasize the low frequency output. BEEP: Keypad sound setting. Display Bright: set the LCD screen brightnes
15 CALIBRATION procedure of the touch screen is described as below: When the target moves to another position, tap and hold at the center of the new
16 Troubleshooting guide Symptom Cause Solution General No power The car ignition is not on. The fuse is blown. If the power supply is properly c
17 Specification General Power supply: 12 V DC Current consumption: Max. 10 A Maximum power output: 35W x 4 channels (Max.) Compatible formats:
2 Important Safeguards z Using the device at temperature below -10℃ may cause the breakage of the device. BEFORE USING PLEASE HEAT UP THE PASSENGER
3 Contents Important Safeguards...2
4 Accessories Package contains the following accessories for installation and operation of the unit. (1) Washer, Spring Washer, M5 Nut 1 each (2) M
5 Installation/Un-installation Note Before starting installation of the unit, make sure the wiring is connected properly. Use only the parts provided
6 Wiring Connections NOTE: Never connect cable to the system while it is connected to the battery power. Whenever the unit is disconnected from th
7 Note: - Only use groundless loudspeakers. - Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your loudspeakers a
8 Panel Control 1. POWER/MUTE Button Press it to turn on the unit. When turned on, press it to mute the volume output, press and hold for 2 seconds
9 Remote control Remove Battery Note: The distance may vary according to the brightness of ambient light. If the remote is not used for an
Comments to this Manuals